Male' Water and Sewerage Company Pvt Ltd.
Maldives
Invitation for the Expression of Interest for the Service, Repair and Docking of MWSC Landing Craft – Marine 3 – Time Extension

Introduction

Due to Insufficient response, Male’ Water & Sewerage Company Pvt Ltd. extends the participation period for Service, Repair and Docking of MWSC Landing Craft – Marine 3 tender published on 14th June 2021 (Ref: MWSC-L/3/ADV/2021/223). Eligible and interested bidders may apply based on the following information.

Male’ Water & Sewerage Company Pvt Ltd is an ISO and OHSAS Certified multi-disciplinary Engineering and Manufacturing organization mainly involves in providing Utility and Manufacturing related products and services to the Maldives.

Male’ Water & Sewerage Company Pvt Ltd is desirous in employing a Contractor for the work Supply and Delivery of Materials and Equipment required for Water, Sewer & Fire systems under taken by the company under Contractor Finance Model.

 

Scope of Supply

Male’ Water & Sewerage Company Pvt. Ltd. is desirous in employing a CONTRACTOR for the work of Servicing, Repairing and Docking of MWSC Landing Craft – Marine 3. The scope of supply includes;

  • Sand Blasting the whole vessel’s inside, outside and bottom.
  • Painting the whole outside of the wheelhouse and bridge.

-          Primer red oxide – 1 layer (Brand: Joton)

-          Finishing paint-  1 layer (Color: White / Brand: Joton)

  • Painting the whole vessel including the sides, bottom, inside the deck area and deck.

-          Primer red oxide – 1 layer (Brand: Joton)

-          Tigh coat – 1 layer (Any Marine Brand)

-          Anti-fouling – 1 layer (Brand: Joton)

-          Finishing paint-  1 layer  (Color: Green / Brand: Joton)

  • Cleaning and painting all the fuel and fresh water tanks.

-          Gas free the Fuel Tanks

-          Washing both fuel/water tanks using adequate detergent

-          Sand Blasting  both fuel/water tanks

-          Applying Primer red oxide – 1 layer (Brand: Joton ) in both fuel/water tanks

-          Applying cement layer in all water tanks

  • Removal of the existing Ramp

-          The ramp must be handed over to MWSC upon removal.

  • Modify the bow of the vessel – Cut off the ramp and close the bow with steel.

-          Closing the opening of bow with steel. This has to be completed prior to Sandblasting.

  • Renewal paint on the deck of the vessel including the pipelines.

-          Primer red oxide – 1 layer (Brand: Joton)

-          Finishing paint-  1 layer  (Color: Green on deck / Brand: Joton)

  • Check and repair the shafts and propellers of both engines.

-          Both engine shafts and Propellers must be examined and a report should be provided. The report should highlight any bends, damages or any issues with sizes of both shafts/propellers.

  • Toilet renovations including renewal pipe systems

-          Installing a second drainage pipeline in the toilet.

  • Starboard Winch Gear repair or renewal – Anchor

-          Both winches of the vessel must work after repair. If required Portside Winch also should be repaired.   


Qualification Information & Requirement

Interested and competent contractors wishing to carry out the above project must submit the following documents.

  • Business Registration Certificate at Economic Ministry
  • Mira Tax Clearance (within 6 months)
  • GST Registration
  • The vendor must have their own dockyard and should not be out sourced to a third party.
  • Vendor must have been in service of docking for at least 5 years.
  • Vendor must provide MWSC officials access to dockyard at any time for inspections.
  • Vendor must take responsibility for any damages caused to any of our vessels, staffs or equipment due to vendor’s negligence or carelessness.
  • Vendor must possess all equipment’s and machineries required to attend the repair works mentioned in the scope of work.

a)      Sand Blasting Equipment

b)      Lathe Machine

c)      Generators to Power up the vessel and equipment

d)      Winches or equivalent safety equipment to slip the vessels

e)      Welding Plant

f)       Balloons for slipping the vessel

g)      Excavator

h)      Tower Crane

i)       Material Fabrication services

  • While painting the following coating must be applied.

a)      Primer red oxide – 1 layer

b)      Tigh coat – 1 layer

c)      Anti-fouling – 1 layer

d)      Finishing paint - 1 layer

  • Colour codes to apply for the finishing paint layer will be selected by MWSC.
  • Primer, Anti-fouling and Finishing paint must be selected from ‘Jorton’ brand of paint.
  • Apart from above, contractors may submit any documents, information that may be necessary to prove their qualification for the work.

 

Those who wish to participate in the tender must pay a non-refundable participation fee of MVR 500. Interested candidates shall register for the tender through MWSC website https://www.mwsc.com.mv/Tenders/page/1 and fill out the tender form to proceed with the payment. For registration, payment must be made on or before 23rd June 2021.

 

Each bidder shall furnish a bid security in the amount of MVR 10,000, Successful bidder shall furnish to the Employer a performance Bank Guarantee in an amount equal to ten percent (10%) of the Contract sum within Fourteen (14) days of receipt of the notification of award from the Employer.

Tender Schedule

 

Step


Process

Date & Time

Venue

  1.  

Information Session

24th June 2021, 01:30 PM.

MWSC CS Building, 6th Floor

Ameenee Magu, Male’,

Maldives.

  1.  

Submission of Proposal & Proposal Opening

30th June 2021, 11:00 AM.

MWSC CS Building, 6th Floor

Ameenee Magu, Male’,

Maldives.

 

Note: Tender documents will be provided to the participants during the information session.

For more information, please contact Contracting Department (+960) 332-3209, 995-9007, 763-1293, 779-1938.

Contracting Department

22 June 2021
ހޯދާ